STOP LIGHT COVER | Scania L, R, New R

Manufacturer: APPLICATIONS
SKU: 026SRAGNA
Coppia Carter StopCoppia Carter Stop
  • Description
  • MOUNTING INSTRUCTIONS

STOP LIGHT COVER | Scania L, R, New R

Super mirror stainless steel (aisi 304) applications for the carter of the stop lights of Scania L, R and New R. To apply over the original rear stop. The kit includes duoble sides adhesive for fixing and is composed of two parts (left and right).

MOUNTING INSTRUCTIONS

DIRECTIONS FOR USE.


PREPARATION OF SURFACES FOR BONDING:

WIPE SURFACE WITH LINT-FREE CLOTH SOAKED WITH SURFACE CLEANER™ 3M OR WITH A 50/50 ISOPROPYL ALCOHOL AND WATER MIXTURE. FOR POWDER-COATED SURFACES OR PLASTIC MATERIALS IS RECOMMENDED TO APPLY PRIMER 94 ™ (LOOK AT THE SPECIFICATION'S PRODUCT).
CLEAN LINT-FREE CLOTH SHOULD BE USED STRAIGHT TOWARDS ONE DIRECTION UNTIL NO RESIDUE IS VISIBLE. SURFACES MUST BE DRY BEFORE APPLICATION OF THE TAPE. THE DRYING TIME DEPENDS ON ENVIRONMENTAL CONDITIONS. KEEP THE CONTAINER ALWAYS CLOSED AND DO NOT REFILL OR DECANT INTO OTHER CONTAINERS. THIS WILL AVOID CONTAMINATION OF THE CLEANER AND EVAPORATION OF ALCOHOL, AND THUS CHANGE IN CONCENTRATION. CONTAMINATED SURFACES SHOULD BE CLEANED.


NOTE:
SURFACES MUST BE CLEAN, DRY AND FREE FROM OIL OR GREASY FILM BEFORE BONDING. REMOVE COARSE CONTAMINATION WITH LINT-FREE CLOTH. OXIDE LAYERS CAN BE REMOVED WITH SCOTCH-BRITE™ 7447.


APPLICATION:
REMOVE THE FILM OF ADHESIVE INCLUDED IN THE PRODUCT AND APPLY IT ON THE SURFACE PRESSING IT DOWN FIRMLY. LEAVE CONSOLIDATE BONDING FOR 72 HOURS.
THE IDEAL APPLICATION TEMPERATURE IS BETWEEN 21°C AND 38°C. APPLICATIONS AT TEMPERATURES BELOW 10°C ARE NOT RECOMMENDED.

Current Stock Level:
0

TORNA AL CATALOGO

NEWSLETTER

Log in

create an account

fb iconLog in with Facebook